RM1.27
Carbide Inserts Category: Turning InsertInsert Style: DCMT
Insert Grade: HP1050, HP1020
Positive
Material: Hartmetall
Chip Breaker: JHQ
Insert Shape and Angle: 55°
Package Quality: 10 pcs/box
Machining Parts Material: Stahl
Maching Process: Fertigstellung
About the Replacement 55° Carbide Insert
Though not inexpensive, it is a pretty good deal when you consider you are getting four cutting tools in one and are saving a lot of time in tool sharpening.
Carbide cutters give good finishes on hard-to-machine materials such as cold-rolled steel. They will also work on aluminum, brass, or leaded steels, lasting practically forever. However, the best finishes on those materials are still achieved with a good, sharp, high-speed steel tool.
Aluminum End mill: 12mm Dia, 36mm LOC, 12mm Shank, 75mm OAL, 3 Flute, Solid Carbide, Uncoated
2 × RM9.98
M36x3 HSS 6542
2 × RM10.85
Aluminum End mill: 12mm Dia, 36mm LOC, 12mm Shank, 75mm OAL, 2 Flute, Solid Carbide, Uncoated
2 × RM9.98
Flat End mill: 12mm Cut Dia, 30mm LOC, 12mm Shank Dia, 75mm OAL, 4 Flute, Solid Carbide, TiSiN Coated
1 × RM9.98
Ball Nose End mill: 12mm Cut Dia, 24mm LOC, 12mm Shank Dia, 75mm OAL, 4 Flutes, Solid Carbide, TiSiN Coated
1 × RM15.05
Ball Nose End mill: 8mm Dia, 16mm LOC, 8mm Shank, 60mm OAL, 2 Flutes, Solid Carbide, TiSiN Coated
1 × RM5.36
Aluminum End mill: 12mm Dia, 30mm LOC, 12mm Shank, 75mm OAL, 3 Flute, Solid Carbide, DLC Coated
2 × RM9.98
Centering Drill Spot: 12mm Dia, 24mm LOC, 12mm Shank, 75mm OAL, 2 Flute, Solid Carbide, TiSiN Coated
4 × RM14.12
10-32 UNC
10 × RM6.98
VNMG160408 Cutting Insert
2 × RM1.93
80° Carbide Insert, WNMG Insert, Negative, MSF
3 × RM1.48
80° Carbide Insert, WNMA Insert, Negative
2 × RM1.38Zwischensumme: RM249.31
Rezensionen
Es gibt noch keine Rezensionen.