RM2.80
Kategori Sisipan Karbid: Pusingan sisipanMasukkan Gaya: VBMT
Masukkan Gred: HH6120
Positif
Bahan: Karbid
Pemecah cip: SH
Masukkan Bentuk dan Sudut: 35°
Kualiti Pakej: 10 biji/kotak
Bahan Bahagian Pemesinan: Hard material
Proses Pemesinan: Semi-finishing
About the Replacement 35° Carbide Insert
Though not inexpensive, it is a pretty good deal when you consider you are getting two cutting tools in one and are saving a lot of time in tool sharpening.
Carbide cutters give good finishes on hard-to-machine materials such as cold-rolled steel. They will also work on aluminum, brass, or leaded steels, lasting practically forever. However, the best finishes on those materials are still achieved with a good, sharp, high-speed steel tool.
55° Carbide Insert, KNUX Insert, Positve
2 × RM1.64
35° Carbide Insert, VNMG Insert, Negative
1 × RM1.88
80° sisipan karbid, sisipan WNMG, negatif, SH
1 × RM2.10
MCKNR2020K12
1 × RM8.36
55° Carbide Insert, DCMT Insert, Positive, SL1
1 × RM1.27
80° Carbide Insert, WNMG Insert, Negative, SPM
2 × RM1.52
80° Carbide Insert, WNMG Insert, Negative, MSF
1 × RM1.48
Sisipan Karbid 80°, Sisipan CCMT, Positif, SL1
1 × RM0.95
80° Carbide Insert, WNMA Insert, Negative
1 × RM1.38
Gergaji hujung segi empat sama: Diameter potongan 8 mm, Panjang potongan 20 mm, Diameter batang 8 mm, Panjang keseluruhan 60 mm, 2 alur, Karbid pepejal, bersalut TiSiN
1 × RM4.12
DWLNR2020K08
1 × RM10.65
35° Carbide Insert, VNMG Insert, Negative, MAL
1 × RM1.82
55° Carbide Insert, DCMT Insert, Positive, MVL
1 × RM1.19Jumlah separa: RM41.52
Ulasan
Masih belum ada ulasan.