RM2.24
Kategori Sisipan Karbid: Pusingan sisipanMasukkan Gaya: DCMT
Masukkan Gred: HH6120
Positif
Bahan: Karbid
Pemecah cip: SH
Masukkan Bentuk dan Sudut: 55°
Kualiti Pakej: 10 biji/kotak
Bahan Bahagian Pemesinan: Hard material
Proses Pemesinan: Semi-finishing
About the Replacement 55° Carbide Insert
Though not inexpensive, it is a pretty good deal when you consider you are getting four cutting tools in one and are saving a lot of time in tool sharpening.
Carbide cutters give good finishes on hard-to-machine materials such as cold-rolled steel. They will also work on aluminum, brass, or leaded steels, lasting practically forever. However, the best finishes on those materials are still achieved with a good, sharp, high-speed steel tool.
| Model | DCMT11T304-SH HH6120 |
|---|
80° Carbide Insert, WNMG Insert, Negative, MSL
2 × RM1.33
55° Carbide Insert, DCMT Insert, Positive, JHQ
1 × RM1.27
Sisipan Karbid 80°, Sisipan WNMG, Negatif, L-S,R-S
2 × RM1.33
M27 HSS 6542
1 × RM18.65
Gergaji hujung segi empat: Diameter 12 mm, Panjang keseluruhan 30 mm, Batang 12 mm, Panjang keseluruhan 75 mm, 4 alur, Karbida pepejal, Dilapisi AlTiN
1 × RM7.43
80° Carbide Insert, WNMG Insert, Negative, MSF
1 × RM1.48
35° Carbide Insert, VNMG Insert, Negative, MAL
1 × RM1.82
Sisipan Karbida 80°, Sisipan WNMG, Negatif, TM
2 × RM1.38Jumlah separa: RM38.73
Ulasan
Masih belum ada ulasan.