Precision CNC machined stainless components in front of a milling spindle

We read the drawing
before we quote it.

Gran Industries is a Malaysia-based precision CNC machining manufacturer. Aluminium, copper alloy, stainless steel, engineering plastics and carbon fibre — milled and turned to your drawing, from first article through repeat production.

Start a quote  → See 419 machined parts
88
CNC machines running
51,000
Parts a day, installed capacity
24 h
Quote turnaround
419
Parts in catalogue

Eighty-eight machines.
Here is the list.

Most suppliers make you ask. Ours is on the page: what is on the floor, what each machine can reach, and how many parts a day it puts out.

EquipmentQtyWorking rangeOutput / day
CNC lathe, 3-axis26Ø 2 – 180 mm30,000
CNC lathe, 4-axis7Ø 2 – 120 mm5,000
Engraving mill, 3-axis40500 × 700 mm8,000
Engraving mill, 4-axis10600 × 850 mm2,500
Machining centre, 3-axis3800 × 1200 mm5,000
Machining centre, 5-axis21 – 300 mm part500
Total installed88up to 800 × 1200 mm51,000

What we can hold

Standard toleranceISO 2768-m (± 0.10 mm)
Tightest tolerance held± 0.005 mm
Surface finish, as machinedRa 1.6 µm (Ra 0.4 on request)
Minimum order quantity1 pc, prototype
Quality systemISO 9001:2015

What we cut and coat

Aluminium6061 · 7075 · 6063 · 5052
Copper and brass32 parts in catalogue
Stainless steel26 parts in catalogue
Engineering plastics27 parts in catalogue
Carbon fibreCutting · routing · drilling
AnodisingType II and Type III, partner-processed
Passivation and platingASTM A967 · electroless nickel · zinc

Nothing here is a range we can only meet on a good day. If a feature on your drawing sits outside it, we say so in the quote rather than after the first article.

Send a drawing  →

419 parts, photographed
the way they shipped.

Ten material families, every one of them a part that came off our machines. Open a family to see the full set with dimensions and materials.

Anodised aluminium machined sleeves in several colours
Aluminium alloy34 parts
Machined brass manifold block with cross-drilled ports
Copper and brass32 parts
Polished stainless steel ball-jointed linkage assembly
Stainless steel26 parts
Machined engineering plastic gear ring
Engineering plastics27 parts
Gloss carbon fibre moulded cover with visible twill weave
Carbon fibre11 parts
Stainless rod end bearings
FA automation32 parts
Push-to-connect pneumatic elbow fitting
Pneumatic fittings26 parts
Knurled aluminium control knobs with indicator dot
Control knobs11 parts
Gold anodised machined enclosure
Panels and enclosures9 parts
Stainless solar panel roof hooks and mounting brackets
Solar mounting8 parts

From your drawing
to a measured first article.

Four points where something has to be decided. We tell you what we need at each one, so nothing waits on a question nobody asked.

Hour 0

You send

STEP or IGES plus a dimensioned PDF, material, quantity, the tolerances that matter, finish, and your target date.

Within 24 h

We review and quote

An engineer reads the drawing, flags anything that will cost you money for no function, and prices what is actually there.

5–7 working days

First article

The first piece is measured against the drawing and reported before the batch is released to run.

10–15 working days

Production and delivery

Batch machining, finishing, final inspection, and shipping documents prepared for export from Johor.

We publish how to specify
the features we machine.

Eighty articles on tolerancing, hole and thread callouts, surface finish and material choice — written by the people who cut the parts. It is also the fastest way to see whether we understand your drawing.

Machined impeller with radial vanes, annotated with leader lines at the bore, vane wall and base flange BORE Ø VANE WALL BASE FLANGE
Every feature is a decision gran.my / blog

A separate line: cutting tools.

Alongside contract machining we stock carbide inserts and end mills — the same consumables our own machines run on. Different order process, same catalogue.

Browse the tooling shop  →
Coated carbide milling insert Carbide inserts136 SKU Set of solid carbide end mills Carbide end mills32 SKU

Machining since 2008.
In Malaysia since 2025.

One business, three moves: the shop floor discipline was built in China, the capacity was added in Sichuan, and the international-facing service now runs from Johor.

2008 · Shenzhen

Founded

CNC machining, cold heading and export manufacturing — where the operating discipline behind today’s business was built.

2020 · Sichuan

Capacity added

A second plant broadened equipment coverage and production lines for more stable repeat supply.

2025 · Johor

Malaysia service base

GRAN INDUSTRIES SDN. BHD. now handles international quotation, follow-up and delivery from Malaysia.

Registered202501043782 (1645190-A)
Quality systemISO 9001:2015
Export fromJohor, Malaysia

Send the drawing.

Six things let us quote without a round of questions. Miss one and we will ask — but the quote takes a day longer.

  • 3D model STEP / IGES
  • Dimensioned drawing PDF
  • Material and grade required
  • Quantity, and repeat volume required
  • Critical tolerances and datums if any
  • Finish and target date if any
+60 108812868 info@gran.my No. 85, Jalan SILC 2/1, Johor

Or email STEP / IGES / PDF / DWG straight to info@gran.my — we will match it to this request.

Your drawing stays with the engineering team. We reply within 24 hours on business days.

x

No products in the basket.