Nessun prodotto nel carrello.
0
We read the drawing
before we quote it.
Gran Industries is a Malaysia-based precision CNC machining manufacturer. Aluminium, copper alloy, stainless steel, engineering plastics and carbon fibre — milled and turned to your drawing, from first article through repeat production.
88
CNC machines running
51,000
Parts a day, installed capacity
24 ore
Tempi di elaborazione dei preventivi
419
Parts in catalogue
Eighty-eight machines.
Here is the list.
Most suppliers make you ask. Ours is on the page: what is on the floor, what each machine can reach, and how many parts a day it puts out.
EquipmentQtyWorking rangeOutput / day
CNC lathe, 3-axis26Ø 2 – 180 mm30,000
CNC lathe, 4-axis7Ø 2 – 120 mm5,000
Engraving mill, 3-axis40500 × 700 mm8,000
Engraving mill, 4-axis10600 × 850 mm2,500
Machining centre, 3-axis3800 × 1200 mm5,000
Machining centre, 5-axis21 – 300 mm part500
Total installed88up to 800 × 1200 mm51,000
Ciò che possiamo custodire
Standard toleranceISO 2768-m (± 0.10 mm)
Tightest tolerance held± 0.005 mm
Finitura superficiale, così come lavorataRa 1.6 µm (Ra 0.4 on request)
Quantità minima d'ordine1 pezzo, prototipo
Sistema di qualitàISO 9001:2015
What we cut and coat
Aluminium6061 · 7075 · 6063 · 5052
Copper and brass32 parts in catalogue
Acciaio inossidabile26 parts in catalogue
Engineering plastics27 parts in catalogue
Carbon fibreCutting · routing · drilling
AnodisingType II and Type III, partner-processed
Passivation and platingASTM A967 · electroless nickel · zinc
Nothing here is a range we can only meet on a good day. If a feature on your drawing sits outside it, we say so in the quote rather than after the first article.
Send a drawing →419 parts, photographed
the way they shipped.
Ten material families, every one of them a part that came off our machines. Open a family to see the full set with dimensions and materials.
Aluminium alloy34 parts
Copper and brass32 parts
Acciaio inossidabile26 parts
Engineering plastics27 parts
Carbon fibre11 parts
FA automation32 parts
Pneumatic fittings26 parts
Control knobs11 parts
Panels and enclosures9 parts
Solar mounting8 parts
From your drawing
to a measured first article.
Four points where something has to be decided. We tell you what we need at each one, so nothing waits on a question nobody asked.
Hour 0
You send
STEP or IGES plus a dimensioned PDF, material, quantity, the tolerances that matter, finish, and your target date.
Within 24 h
We review and quote
An engineer reads the drawing, flags anything that will cost you money for no function, and prices what is actually there.
5–7 working days
First article
The first piece is measured against the drawing and reported before the batch is released to run.
10–15 working days
Production and delivery
Batch machining, finishing, final inspection, and shipping documents prepared for export from Johor.
Pubblichiamo le istruzioni su come specificare
i pezzi che lavoriamo.
Eighty articles on tolerancing, hole and thread callouts, surface finish and material choice — written by the people who cut the parts. It is also the fastest way to see whether we understand your drawing.
BORE Ø
VANE WALL
BASE FLANGE
25 Aug 2026
Come specificare il trattamento superficiale per i pezzi lavorati con macchine CNC
Leggi →
24 Aug 2026
Come specificare gli angoli interni e i raggi di raccordo per i pezzi lavorati con macchine CNC
Leggi →
18 Aug 2026
Come specificare i fori ciechi e le condizioni del fondo per i pezzi lavorati con macchine CNC
Leggi →
10 agosto 2026
Lavorazione delle materie plastiche tecniche: tornitura, fresatura, foratura e finitura
Leggi →
09 Aug 2026
CNC Milling vs CNC Turning: How to Choose for Custom Parts
Leggi →
06 Aug 2026
Carbon Fiber Processing Methods: Cutting, Routing, Drilling and Edge Trimming
Leggi →
Tutti gli 80 articoli →A separate line: cutting tools.
Alongside contract machining we stock carbide inserts and end mills — the same consumables our own machines run on. Different order process, same catalogue.
Browse the tooling shop →Machining since 2008.
In Malaysia since 2025.
One business, three moves: the shop floor discipline was built in China, the capacity was added in Sichuan, and the international-facing service now runs from Johor.
2008 · Shenzhen
Founded
CNC machining, cold heading and export manufacturing — where the operating discipline behind today’s business was built.
2020 · Sichuan
Capacity added
A second plant broadened equipment coverage and production lines for more stable repeat supply.
2025 · Johor
Malaysia service base
GRAN INDUSTRIES SDN. BHD. now handles international quotation, follow-up and delivery from Malaysia.
Registered202501043782 (1645190-A)
Sistema di qualitàISO 9001:2015
Export fromJohor, Malaysia
Invia il disegno.
Six things let us quote without a round of questions. Miss one and we will ask — but the quote takes a day longer.
- Modello 3D STEP / IGES
- Disegno quotato PDF
- Material and grade obbligatorio
- Quantità e volume di ripetizione obbligatorio
- Critical tolerances and datums se ce ne sono
- Finish and target date se ce ne sono
x